Whether you have a small SIB, large RIB, paddleboard or other inflatable, it is really frustrating to pump it up to the correct pressure, disconnect your pump and hear "HISSSSS" ....especially if you've worked up to a high pressure or...
PLA (Polylactic Acid) is a popular material used in desktop 3D printing. If you've made, or had made, an item in PLA, it can be stuck to your PVC tube using our 2 part PVC adhesive which can be found HERE.
Yes, you can! Marinas are usually happy for parcels to be delivered to them, but there is another option too. A couple of weeks ago, I was introduced to a very useful delivery option by loyal customer Ken . Ken...
The strips which go from the tube down onto the hull are usually called 'attachment strips', 'fitting strips' or more specifically 'underneath strips'. They are made of the same material as the tube, so a PVC tubed boat will have...
Unfortunately, if the air-deck of your SIB has been overinflated to the point that the 'stitches' keeping the two layers of the boat floor parallel have been broken, and the once flat surface is now trying to resemble a cylinder this...
Yes! We are able to easily ship to most countries using Royal Mail and the postal service in the destination country. Even better news, is we've managed to SLASH the costs too! Check out our delivery page for full details...
There isn't a standard length for the elephant trunks / drainage socks that are fitted on the transoms of many RIBs and other hard boats. Transom heights and the depth a boat sits in the water all affect the length...
We wouldn’t recommend using any sort of scraper for the 2 part PVC adhesive or 2 part Hypalon adhesive (ToobBond) that we sell. What we do recommend is a short/stiff brush. If you’re using a normal paint brush, it’s simple...
Unfortunately not necessarily as both PVC and Hypalon have a woven fabric layer in them, which is sometimes referred to as the base layer. The Hypalon we sell is Orca Pennel & Flipo and typically this has a High Tenacity...
